Base Antennas

Model: IPT-OMBA-3-NF
Frequency Range: 213-225 MHz
Gain: 2.5 dBi
VSWR: 1.25:1 Typical, <2.0:1 entire band
Polarity: Vertical
Vertical Beamwidth: 75 degrees
Horizontal Beamwidth: 360 degrees
Power Input: 100 watts
Dimensions: 1.750” x 48” ht Antenna only
Mount Dimensions: 12” Ht. x 5” W x 4.5” D
Weight: Antenna 3 lbs
Weight: Mount 6 lbs
Wind rating: 160 MPH
Mounting Hardware: Included
Mast Size: 2.0” – 3.0”

Model: IPT-OMBA-6-NF
Frequency Range: 212-230 MHz
Gain: 6 dBi
VSWR: 1.25:1 typical, <2.5:1 entire band
Shunted Design
Polarity: Vertical
Vertical Beamwidth: 52 degrees
Horizontal Beamwidth: 360 degrees or ommi directional pattern
Azimuthal Ripple: <1 dBi
Power Input: 100 Watts
Radome Dimensions: 1.750” x 98″ Antenna
Mount Dimensions: 12”Ht. x 5” W x 4.5” D
Weight: Antenna, 11 lbs
Mount: 6 lbs
Wind Rating: 130 MPH
Mounting Hardware: Included

SPECIFICATIONS:
Model: IPT-BDBA-220-7-NF
Frequency: 200-240 MHz (Min)
Gain: 7 dBi
Vswr: <1.50:1 typical
Polarity: Vertical: Figure 8 or Bi-directional pattern
Vertical Beam width:
Horizontal Beam width:
Dimensions: 48”’ L x 35” W x 2.5” D
Wind survival: 180 MPH
Wt: 23 lbs
Mounting Brackets: Included
Mast Pipe: 2.0”-3.0”

SPECIFICATIONS:
Model: IPT-BDBA-9-NF
Frequency Range: 213-230 MHz
Gain: 9.1 dBi
VSWR: 1.25:1 Typical
Polarity: Vertical, Bi-directional or Figure 8 pattern
Vertical Beamwidth: 50 degrees
Horizontal Beamwidth: 86 degrees
Power Input: 100 watts
Dimensions: 8’ Ht. x 35” W x 2.5” D
Wt: 33 lbs
Wind Rating: 130 MPH
Mounting Hardware: Included
Mast Size: 2.0” – 3.0”

IPT-GPS27-B
The IPT-GPS27-Bis a Quadrifilar Helix GPS Antenna (1.5″ OD x 4.5″ H) designed for use with GPS L1, 1.5754 GHz receivers and systems.
It features a built-in, robust (+10 dBm IIP3, In -5 dBm/Out +18 dBm P1dB), +22 dB Low Noise Amplifier, preceded by a GPS filter, and followed by another GPS filter (2 filters). This combination of a small QFHA, a tough LNA and 2 filters, makes the IPT-GPS27 an ideal antenna for very harsh electromagnetic environments, or in applications where GPS performance is affected by out-of-band interference from other devices, such as a radio transmitter.
LNA power is provided by your GPS receiver through the coaxial cable. No external power supplies are necessary. The IPT-GPS27-B is very tolerant of wide voltage variations and voltage range. Minimum supply voltage for nominal operation is +3.5 VDC. Operation at lower voltages derates performance of the LNA.

 

The pipe mount base adaptor threads onto a 1” NPT pipe. Various connectors are available which include TNC-F, NF, or BNC-F.

 

SPECIFICATIONS:
Frequency range: 1565-1585 MHz
Coverage: Hemispherical
Polarization: Right-Handed, Circular (AR 3 dB)
Gain: +27 dBic , (optional gains from 10 dBi – 60 dBi)
Nominal Impedance: 50 ohm (RF)
Input Power: Receive only antenna
VSWR: 2.0
LNA Noise Figure: 3.9 dB
LNA IIP3: +10 dBm
LNA P1dB: +18 dBm out / -5 dBm in
LNA Current: 70 mA
LNA Supply Voltage: 3.5-18 VDC (internally regulated)
Connector: NF, TNC-F, BNC-F
Dimensions:
         Housing (1.5″) OD x (4.5″) h
         Bottom flange (2″) OD x (0.5″) h
         Base Adaptor: 3” OD x 2” ht.
Mounting: 1 screw, 1/4″-20
Operating Temperatures: -40C to +85C
Weight: 1.1 lbs